172-65592MA-07 (TM5N/TM5N-EX TrapMan Type P) 12 May 2022
53
9.2.25 Display/edit screwed connection face to face length
This item is used to display or edit the
face to face length for a steam trap with
screwed connections.
If you do not wish to enter or revise the
value, press
to move to the next
item.
1. For a face to face length of 400 mm,
enter
0
4
0
0
.
For a face to face length of 9.5 in.,
enter
0
9
5
0
.
(Values must be entered in decimal
format.)
2. Press
to confirm the
data and move to the next or previous item.
NOTE:
The default for this item is 0000. When you enter new inspection data on the TM, the value
for this item will be 0000.
Changing this item to a different value makes the new value the default. Once you change
the value for a trap by the procedure above, any new traps you add will default to the new
value for this item.
9.2.26 Display/edit upstream temperature
This item is used to display or edit the
surface temperature of piping
upstream of the steam trap.
If you do not wish to enter or revise the
value, press
to move to the next
item.
1. For a temperature of 40
°C , enter
0
4
0
.
For a temperature of 104
°F, enter
0
4
.
2. Press
to confirm the
data and move to the next or
previous item.
NOTE:
The default for this item is 000. When you enter new inspection data on the TM, the value
for this item will be 000.
Changing this item to a different value makes the new value the default. Once you change
the value for a trap by the procedure above, any new traps you add will default to the new
value for this item.
9.2.27 Display/edit condensate recovery temperature
UPSTREAM TEMP.
40
C
0
The cursor will blink indicating
that data can be entered.
The surface temperature
of upstream piping
appears here in
C.
UPSTREAM TEMP.
04
F
1
The cursor will blink indicating
that data can be entered.
The surface temperature
of upstream piping
appears here in
F.
SCREW FTOF
9.50in
0
The cursor will blink indicating
that data can be entered.
The face to face length
appears here in inches.
SCREW FTOF
400 mm
0
The cursor will blink indicating
that data can be entered.
The face to face length
appears here in mm.
