TLV ThermoDyne A3N-AF3N Скачать руководство пользователя страница 11

11.          Express Limited Warranty

Subject to the limitations set forth below, TLV Corporation, a North Carolina corporation (“

TLV”) 

warrants that products which are sold by it or TLV International, Inc., a Japanese corporation 

(“

TII”), which products (the “Products”) are designed and manufactured by TLV Co., Ltd., a 

Japanese corporation (“

TLVJ”), conform to the specifications published by TLV for the 

corresponding part numbers (the “

Specifications”) and are free from defective workmanship 

and materials. With regard to products or components manufactured by unrelated third parties 

(the “

Components”), TLV provides no warranty other than the warranty from the third party 

manufacturer(s).

Duration Of Warranty

This warranty is effective for a period of the earlier of: (i) three (3) years after delivery of Products 

to the first end user in the case of sealed SST-Series Products for use in steam pressure service 

up to 650 psig; (ii) two (2) years after delivery of Products to the first end user in the case of 

PowerTrap

®

 units; or (iii) one (1) year afterdelivery of Products to the first end user in the case of 

all other Products. Notwithstanding the foregoing, asserting a claim under this warranty must be 

brought by the earlier of one of the foregoing periods, as applicable, or within five (5) years after 

the date of delivery to the initial buyer if not sold initially to the first end user.

ANY IMPLIED WARRANTIES NOT NEGATED HEREBY WHICH MAY ARISE BY OPERATION OF 

LAW, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A 

PARTICULAR PURPOSE AND ANY EXPRESS WARRANTIES NOT NEGATED HEREBY, ARE 

GIVEN SOLELY TO THE INITIAL BUYER AND ARE LIMITED IN DURATION TO ONE (1) YEAR

FROM THE DATE OF SHIPMENT BY TLV.

Exclusive Remedy

THE EXCLUSIVE REMEDY UNDER THIS WARRANTY, UNDER ANY EXPRESS WARRANTY OR 

UNDER ANY IMPLIED WARRANTIES NOT NEGATED HEREBY (INCLUDING THE IMPLIED 

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE), IS 

REPLACEMENT; PROVIDED: (a) THE CLAIMED DEFECT IS REPORTED TO TLV IN WRITING 

WITHIN THE APPLICABLE WARRANTY PERIOD, INCLUDING A DETAILED WRITTEN 

DESCRIPTION OF THE CLAIMED DEFECT AND HOW AND WHEN THE CLAIMED DEFECTIVE 

PRODUCT WAS USED; AND (b) THE CLAIMED DEFECTIVE PRODUCT AND A COPY OF THE 

PURCHASE INVOICE IS RETURNED TO TLV, FREIGHT AND TRANSPORTATION COSTS 

PREPAID, UNDER A RETURN MATERIAL AUTHORIZATION AND TRACKING NUMBER ISSUED 

BY TLV. ALL LABOR COSTS, SHIPPING COSTS, AND TRANSPORTATION COSTS 

ASSOCIATED WITH THE RETURN OR REPLACEMENT OF THE CLAIMED DEFECTIVE 

PRODUCT ARE SOLELY THE RESPONSIBILITY OF BUYER OR THE FIRST END USER. TLV 

RESERVES THE RIGHT TO INSPECT ON THE FIRST END USER'S SITE ANY PRODUCTS 

Exceptions To Warranty

This warranty does not cover defects or failures caused by:

1. improper shipping, installation, use, handling, etc., by other than TLV or service 

representatives authorized by TLV; or

2. dirt, scale or rust, etc.; or

3. improper disassembly and reassembly, or inadequate inspection and maintenance by other 

than TLV or service representatives authorized by TLV; or

4. disasters or forces of nature; or

5. abuse, abnormal use, accidents or any other cause beyond the control of TLV; or

6. improper storage, maintenance or repair; or

7. operation of the Products not in accordance with instructions issued with the Products or 

with accepted industry practices; or

8. use for a purpose or in a manner for which the Products were not intended; or

9. use of the Products in a manner inconsistent with the Specifications; or

10. failure to follow the instructions contained in the TLV Instruction Manual for the Product.

̶ 10 ̶

Содержание ThermoDyne A3N-AF3N













Отзывы: