172-65563MAJ-03 (P46S) 6 Oct 2021
5
Specifications
I n s t a l l p r o p e r l y a n d
D O N O T u s e t h i s p r o d u c t o u t s i d e t h e r e c o m m e n d e d
o p e r a t i n g p r e s s u r e , t e m p e r a t u r e a n d o t h e r s p e c i f i c a t i o n r a n g e s .
I m p r o p e r u s e m a y r e s u l t i n s u c h h a z a r d s a s d a m a g e t o t h e p r o d u c t o r
m a l f u n c t i o n s w h i c h m a y l e a d t o s e r i o u s
a c c i d e n t s . L o c a l r e g u l a t i o n s
m a y r e s t r i c t t h e u s e o f t h i s p r o d u c t t o b e l o w t h e c o n d i t i o n s q u o t e d .
C A U T I O N
U s e o n l y u n d e r c o n d i t i o n s i n w h i c h n o f r e e z e
-u p w i l l o c c u r . F r e e z i n g
m a y d a m a g e t h e p r o d u c t , l e a d i n g t o f l u i d d i s c h a r g e , w h i c h m a y c a u s e
b u r n s o r o t h e r i n j u r y .
C A U T I O N
Refer to the product nameplate for detailed specifications.
Minimum Operating Pressure: 0.03MPaG (5 psig)
Back pressure should not exceed 50% of the inlet pressure
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are PRESSURE
SHELL DESIGN CONDITIONS,
NOT
OPERATING CONDITIONS.
** For best performance over extended periods, it is recommended that the trap be operated at or
below 2.1 MPaG (300 psig).
*** Valve No. is displayed for products with options. This item is omitted from the nameplate when
there are no options.
Configuration
Model
Production Lot No.
Maximum Allowable
Temperature (TMA)*
Maximum Operating
Temperature (TMO)
Nominal Diameter
Maximum Allowable
Pressure*
Maximum Operating
Pressure**
Valve No.***
No. Name
M* R*
1 Body
2 Cover
3 Disc
4 Screen
5 Screen Holder Gasket
6 Screen Holder
7 Cap
8 Nameplate
* Replacement parts are available only in
the following kits:
M = Maintenance Kit; R = Repair Kit
