TLV LA Series, Инструкция по эксплуатации

Страница: 3 / 12

A
D
F
I
E
B
H
C
G
B
A
G
D
F
C
E
H
CAUTION
Be sure to use only the recommended components when repairing
the product, and NEVER attempt to modify the product in any way.
Failure to observe these precautions may result in damage to the product
or burns or other injury due to malfunction or the discharge of fluids.
Use only under conditions in which no freeze-up will occur. Freezing
may damage the product, leading to fluid discharge, which may cause
burns or other injury.
Use under conditions in which no water hammer will occur. The
impact of water hammer may damage the product, leading to fluid
discharge, which may cause burns or other injury.
2. Specifications
To avoid malfunctions, product damage, accidents or serious injury,
install properly and DO NOT use this product outside the specification
range. Local regulations may restrict the use of this product to below the
conditions quoted.
CAUTION
Refer to the product nameplate for detailed specifications.
* Maximum allowable pressure (PMA) and maximum allowable temperature (TMA) are
PRESSURE SHELL DESIGN CONDITIONS, NOT OPERATING CONDITIONS.
** "Tag No." is displayed for products with options. This item is omitted from the nameplate
when there are no options.
A Model
B Nominal Diameter
C Maximum Allowable Pressure*
D Maximum Allowable Temperature* TMA
E Maximum Operating Pressure
F Maximum Operating Temperature TMO
G Production Lot No.
H Tag No.**
I X-element Type
2.1 Maximum Operating Temperature
:
:
250
(482)
220
(428)
200
(392)
150
(302)
100
(212)
0 0.5
(75)
1.0
(150)
1.3
(185)
1.5
(215)
Operating Pressure MPaG (psig)
T
emperat
u
re
°
C
(
°
F)
2.0
2.1
(300)
1 MPaG = 10.197 kg/cm
2
235 ° C (455 ° F)
Operating Temperature Range
Saturated Steam Curve
LA21
LA13/LA13L