TLS DCV-600, Руководство пользователя

Страница: 3 / 8

1.0 – Warnings
1.0.1 – Read Me
WARNING FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
•
Before the initial start-up, please make sure that there is no damage caused during
transportation.
•
Should there be any damage, consult us immediately and do not use the equipment.
•
To maintain the equipment in good working condition and to ensure safe operation, it is
necessary for the user to follow the safety instructions and warning notes written in this manual.
•
Please note that damages caused by user modifications to this equipment are not subject to
warranty.
•
This product is designed to be installed by a competent, qualified installation technician into
commercial environments.
•
Never let the power cable come into contact with other cables. Handle the power cable and all
mains voltage connections with particular caution!
•
Never remove warning or informative labels from the unit.
•
Do not open the equipment and do not modify the unit.
•
Do not connect this equipment to a dimmed power supply.
•
Do not switch the equipment on and off in short intervals, as this will reduce the system’s life.
•
Only use the equipment indoors.
•
Do not expose to flammable sources, liquids or gases.
•
Always disconnect the power from the mains when equipment is not in use or before cleaning!
Only handle the power-cable by the plug. Never pull out the plug by pulling the power-cable.
•
Make sure that the power cable is never crimped or damaged. Check the equipment and the
power cable periodically.
•
If the equipment is dropped or damaged, disconnect the mains power supply immediately and
have a qualified engineer inspect the equipment before operating again.
•
If the equipment has been exposed to drastic temperature fluctuation (e.g. after transportation),
do not connect power or switch it on immediately. The arising condensation might damage the
equipment. Leave the equipment switched off until it has reached room temperature.
•
If your product fails to function correctly, stop use immediately. Pack the unit securely
(preferably in the original packing material), and return it to TLSPixelite for service.