875240
HDBaseT
/HDMI Splitter 1x4
TLS electronics GmbH Contact: [email protected] 4
Introduction:
The 875240 HDBaseT / HDMI Splitter is a HDBaseT Distribution
Amplifier and splits a single HDMI or DVI audio/video source to 4
HDBaseT outputs and 1 HDMI local output. The HDMI output can be
used to monitor local displays or cascade up to 6 times with additional
875240 HDBaseT / HDMI Splitter. It supports 1080p Full HD up to
4K@30Hz UHD plus all 3D formats, along with multichannel digital audio
formats such as Dolby® True HD and DTS-HD® Master Audio™.
Embedded audio extractors can extract the audio and output via L/R and
Coaxial. Based on HDBaseT Lite chipset inside, the output distance can
reach up to 70m via Cat5e/6/7 (AWG24/1).
TLS HDBaseT PoH Receiver is recommended to utilize the full function
of the HDBaseT outputs of this device. (Not included)
Features:
•
Supports resolutions up to 1080p@60Hz, 4K@30Hz, 36-bit deep
color
•
Full 3D pass- through.
•
Splits a HDMI source to 4 HDBaseT outputs and 1 HDMI output
without loss
•
Supports cascading via HDMI OUT, up to 6 times
•
HDBaseT Lite chipset inside for the output distance up to 70m for
1080P, 40m for 4K.
•
Power the remote receivers, with PoH (Power over HDBaseT), no
power supply needed for the receivers (only TLS receivers!).
•
Extract the audio from HDMI source via analog and digital outputs.
•
Dolby TrueHD and DTS-HD master audio pass through HDMI output
•
Advanced EDID management for rapid integration of sources and
displays
•
LEDs for power-on and outputs indication.
•
Bi-directional IR supported.
•
Easy installation with rack-mounting ears
•
Small compact size
•
HDCP compliant
