Instruction manual
42
Note:
There is an IR sensor located on the control and speaker side of the device.
If the device is not used for a long period of time, remove the batteries in order to prevent battery
fluid from leaking into the remote control.
Starting up the remote control (change of batteries)
The infrared remote control runs on a CR2025 type 3V button cell battery. Press the battery lock in the centre of
the case and then pull the battery compartment out of the remote control. Remove the existing batteries from the
battery compartment and place a new battery into the battery holder. Take care to ensure that the batteries are
placed in the remote control with the correct polarity (“+” symbol, positive pole upwards). Insert the battery holder
fully back into the remote control.
Figure 5
Change of batteries
Содержание 754600
Страница 80: ......
