MotherShip
6
POWER SWITCH
- Press this switch to ON for power. The indicator will illuminate while the power is ON.
Press to OFF to switch off the power.
Please Note The Following:
Before switching ON the power, be sure to set the volume control to the lowest setting in order to avoid damage to the
speakers - the speaker-protection circuit will mute the volume for a few seconds after power is switched ON.
SOURCE
- For selecting the different Signal Source.
VOLUME CONTROL
- To increase or decrease the volume.
Control Room: Front & Rear Panel Controls
Power Switch
Source
Volume
Audio
Signal Input
AC Power
Input
Amplifier
Output
ATTENTION:
Your Control Room should only be
re-started 5 minutes after switching
off, to avoid damaging the tubes.
!
!
Mothership Manual UK.qxd 10/25/07 9:25 AM Page 6
