TKR Group PG 5-8, Руководство пользователя

Страница: 6 / 36

66
2.1 Use for intended purpose
The granule jet blasting device complies with the machi-
nery directive 98/37 EC and is used for processing the
surface of metal using a grainy blasting material, that is
blasted onto the surface that is being processed. The
blasting material is transported using compressed air.
The GP 5-8 granule jet blasting device is used for removing
carbonized material from the inlet channel and valves of combu-
stion engines.
The jet blasting device may only be operated in combination
with the vacuum adapters that are approved for the relevant
engine type and a vacuum cleaner with sufficient suction po-
wer.
Unauthorised modifications or changes to the device are not
permitted for safety reasons.
The granule jet blasting device is safe if used for its correct pur-
pose.
If it is used incorrectly and/or negligently by untrained
personnel, serious injuries could be caused by the es-
caping granules.
The blasting probe must never be used without the
provided vacuum adapter and vacuum equipment with
adequate power.
Never direct the blasting probe at persons or look into
the opening of the blasting probe. Risk of injury!
2.2 Danger sources