2.
Install the new LED light unit
a.
Reconnect the earth wire to the new LED light unit.
b.
Reconnect the power supply cable to the new LED light unit. Either use long-nose pliers, or
remove the front glass to ease access. Follow the instructions in Changing the Front Glass on
page 16 to remove and remount the front glass.
If a black plastic cover is mounted on the power cable, make sure the
cover is firmly pressed down onto the black ball joint.
2.a
2.b
c.
Insert the new LED light unit into the yellow housing.
d.
Close the spring locks.
18
Installation and Maintenance Instructions - LED AGL Runway Guard Lights - type 921
©
TKH Airport Solutions 2022. All rights reserved.
