Feature
Description
1
Video (BNC connector)
For analogue video output.
2
Network connector (RJ-45) and
LEDs
For network/PoE connection and activity
indication.
3
P-Iris
P-Iris lens connection.
4
Audio I/O
Two-way audio transmission.
5
microSD Card slot
Insert the microSD card into the card slot to
store videos and snapshots. Do not remove
the microSD card when the camera is powered
on.
6
Reset button
With the camera powered up, use a proper
tool to push and hold the reset button for at
least 20 seconds. All settings, including the
camera's IP address, are reset to the original
factory settings.
7
Power LED
For power connection indication (green light).
8
Power (12 Vdc/ 24 Vdc / 24 Vac)
For power connection.
9
Data (RS-485)
6. D+
7. D-
10
Alarm I/O
1. Alarm In 2 +
2. Alarm In -
3. Alarm In 1 +
4. Alarm In -
5. Alarm Out +
5.2
Light sensor
A light sensor is used to detect the ambient light for the Day/Night switching function. The
light sensor is located at the front of the camera. The location and definition of the light
sensor is as given below.
Feature
Description
1
Light sensor
Ambient light detection for Day/Night switching
function
Connect the camera
16
