REMOTE CONTROL SOCKET
www.tkbhome.com
www.tkbhome.com
SAFETY AND MAINTENANCE INSTRUCTIONS
MAINTENANCE
NOTE
TIPS
- Make sure that all electric connections and connection cables meet the pertaining regulations and are in conformity with the
operating instruction.
- Do not overload electrical outlets or extension cords, fire or electric shocks can be the result.
- Please contact an expert in case you have any doubts about the mode of operation, the safety or connecting the appliances.
- Keep all parts away from young children's reach.
- Do not store this item on wet, very cold or warm places, this can damage the electronic circuit boards.
- Avoid dropping or shocks, this can damage the electronic boards
- Never replace damaged power cables yourself! In such a case, remove them from the net and take the devices to a workshop.
- Repairs or opening of this item may only be performed by an authorized workshop.
- Wireless systems are subject to interference from cordless phones, microwaves, and other wireless devices operating in the
2.4GHz range. Keep the system AT LEAST 10 ft away from the devices during installation and operation.
The devices are maintenance-free, so never open them. The guarantee becomes void when you open the appliance. Only clean
the outside of the devices with a soft, dry cloth or a brush. Prior to cleaning, remove the devices from all voltage sources.
Do not use any carboxylic cleaning agents or petrol, alcohol or similar. These will attack the surfaces of the devices. Besides,
the vapors are hazardous to your health and explosive. Do not use any sharp edged tools, screw drivers, metal brushes or
similar for cleaning.
- The transmission distance decreases, if the signal needs to go through floors and walls.
- Multiple switches can be controlled by the same buttons on the remote control.
- Metal housings will have a negative influence in the transmission distance.
- In case of power failure or moving the transmitter, the memory still contains the code.
- Delete code: keep the learn button pressed until the LED starts flashing. Release the button and press it again for approximately
6 seconds. All information saved in this receiver is now deleted.
REMOTE CONTROL SOCKET
- 1V1
- 1V2
- 1V3
- 1V4
Socket
100pcs/carton
60pcs/carton
40pcs/carton
30pcs/carton
60pcs/carton
size:55x42x38.5cm
size:54.1x27.5x42cm
size:44.8x42.4x36.5cm
size:50x44x28cm
size:43.4x33.1x28cm
GW: 20.5 kg
GW: 20.1 kg
GW: 19.4 kg
GW: 18.4 kg
GW: 9.7 kg
Packing Information
TW68G ,TW68F,TW68E,TW68C
The home automation system allows easy and wireless on/off switching of lamps and other electronic appliances from a distance.
The remote control can be used to control 4 individual switches.
The wireless communication between the components goes through an encoded signal.
The different components of the system are sold as a set, or separately.
In this general manual, all components will be explained, please mind which exact parts you've purchased.
REMOTE CONTROL SOCKET
REMOTE CONTROL SOCKET
