TKA SP-C61T, Руководство по установке

Страница: 6 / 23

6
4. Connect the wires to the speaker terminals, being sure to observe proper polarity.
For standard speaker cable with red and black wires, connect both red wires (the
red wire coming from the 70V connection on the amplifier or the previous speaker
if there was one AND the red wire going to the next speaker if there is an
additional speaker) to the red positive (+) terminal and both black wires (the black
wire coming from the COM connection of the 70V amplifier or the previous
speaker if there was one AND the black wire going to the next speaker if there is
an additional speaker) to the black negative (
–) terminal.
Note: Some speaker cables may have other ways of designating polarity. Cable with a
clear jacket has a copper-colored wire for positive and a silver-colored wire for
negative. In a cable with white and black wires, the white is positive (70V) and the
black is negative (COM). Cable with both wires the same color may have grooves,
ribs, or stripes on the positive wire to identify it.
5. Check to make sure there are no stray strands of wire outside the terminals. If
there are, remove the wire, twist the strands together, and reconnect the wire to
the terminal.
6. At the final loudspeaker, the only wires connected will be the ones coming from
the previous loudspeaker (or from the amplifier if there is only one speaker in the
system).