File:
F-7406
Page 5 of 8
Product:
TORQ ATV WINCH
4000lb
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
Using a snatch block with a straight pull
Change of direction of pull
Trouble Shooting Guide
Symptoms
Possible Cause/s
Suggested Remedy
Motor does no turn on
Switch assy not connected properly
Insert switch assy firmly to the
connector
Loose battery cable connection
Tighten nuts on cable connectors
Solenoid malfunctioning
Tap solenoid to free contact, applying
12 volts to coil terminal directly. Make
an audible clicking when activating.
Defective Switch assy
Replace switch assy
Defective motor
Check for voltage at armature port
with switch pressed. If voltage is
present, replace motor.
Water has entered motor
Drain and dry. Run in short bursts
without load until completely dry.
Motor runs too hot
Long period of operation
Let winch cool down periodically
Motor runs slowly or without
normal power
Battery run down
Recharge battery
Insufficient current or voltage
Clean, tighten or replace the
connector
Motor runs but cable drum does
not turn
Clutch not engaged
Turn clutch gear ENGAGED position
Motor runs in one direction only
Defective or stuck solenoid
Tap solenoid to free contacts
Replace solenoid
Defective Switch assy
Replace switch assy