File:
F-7406
Page 3 of 8
Product:
TORQ ATV WINCH
4000lb
For further information contact T.J.M. Head Office on (07) 3865 9999. Distributors Australia wide.
Warning:
The use of any other accessory or attachment other than those recommended in the
instruction manual may present a risk of personal injury.
Clutch Operation
The clutch is operated by rotating the clutch lever clockwise or anti-clock wise.
To “ENGAGE” the clutch turn lever clockwise
To “DISENGAGE” the clutch, turn lever anti-clockwise.
(Diagram for illustration proposes only)
CAUTION
Never disengage the winch clutch while the wire rope is under tension. Doing this can seriously damage
the winch and/or cause property damage and serious injury.
Motor Temperature
This winch is designed for intermittent use only.
Do not run this winch at a high load for an extended period of time.
To find the run time while using the winch, stop operation.
Secure the load.
Release the tension on the cable.
Place your hand on the motor to check temperature.
If you feel the motor is warm to the touch, let it cool down for a few minutes.
15-20 minutes is usually satisfactory, than feel the motor again to see if it is ok to continue.
If the motor is labouring, stop sooner and more often to check the motor temperature.
If the winch motor stalls, quickly stop winching and let the motor cool off.
Battery Recommendation
A fully charged battery will give the best performance.
A 12 volt DC battery with a minimum of 12 amp hour charging system will work and 150-250 cranking
amps.
Maintenance
No lubrication will be needed or required for the life of the winch.
Inspect the Synthetic rope and winch before every use.