3/7
ATTENTION
：
DANGER OF LIFE
！
RISKOF FIRE
！
RISK OF SHORT CIRCUIT
！
ATTENTION
：
RISK OF SHORT CIRCUIT
！
ATTENTION
：
DANGER OF LIFE
！
RISKOF FIRE
！
RISK OF SHORT CIRCUIT
！
schools, training facilities, and yourself-help workshops must be supervised
responsibly by trained personnel.
Check the product regularly for any damage to the mains cord! Should you
discover any damage to the malns cord, do not operate or disconnect this product!
Secure the product against accidental operation and contact your specialized
dealer .
Always separate the product from mains by holding the mains plug by the handling
surface .Never disconnect by holding the line cord ! Be sure to connect the product
exclusively to AC110~127V/59~60Hz!
Always be sure during installation, operation, transport and when storing the
product that the mains cord is not exposed to possible mechanical damage, or
damage caused by humidity, fluids, heat or cold!
The products cable entry must not be exposed to stress from pull! Create the mains
connection once the product has been installed only .Always connect the mains
plug last !
The product must only be connected to a proper outlet of the public supply
grid .Connect the mains cord to suitable outlets only ! Use extensions cords in
compliance with specifications only! Do not allow the mains cord to come into
contact with other cords!
Ensure during institution , operation, transport and storage that none of the cables
are freely exposed!
Never touch the mains cord ,mains plug and outlet with wet or damp hands !
When not using the product, and to cleaning always disconnect the product from
mains! To do so, hold the mains plug by the handling surface and never pull the
mains cord!
Never connect the device to dimmer packe!
3. Housing
Always ensure during installation, operation, transport and when storing the
product that no shocks or other forces impact the housing !
The housing must not touch onto any other devices or objects during operation!
Easily flammable materials, e.g. decoration material and other surfaces and objects,
must maintain a minimum distance of 3m to the housing !Walls must maintain a
minimum distance of 50cm to the housing! The device must be installed on a
fireproof surface only (no carpet)1 Always ensure aproper circulation of air.
Do not touch the housing during operation it will heat up .The housing is safe to
touch approx .5 minutes following the end of operation!
The device must never be carried via the projector anns. Use the carring handles
only !
Fluids must not enter the housing as this could reduce the protective insulation
and may trigger short cirouits which may lead to fatal
electro shocks !If
fluid have
entered, disconnect the mains plug immediately and secure the product against
unintentional operation and contact yours specialized dealer! Damage caused as a
resuit of fluids entering the housing is exempt from warranty .
No metal parts or other items must enter the housing as this may reduce the
protective insulation or trigger short circuits which may lead to fatal electric
shocks !If metal parts or other items have entered ,disconnect the mains plug
immediately,secure the product against unintentional operation and contact your
specialized dealer!Damage caused by metal parts or other items in the housing is
exempt fromwarrantly.
4. Operating Environment
The product must be operated and stored in a dry environment only !Splash
water ,rain, humidity, fog may reduce the protective insulation which may lead to
fatal electric shocks! The limit value for
relactive humidity is 50% at 45
℃
.A
minimum distance of 1.5m to a fog machine must be observed ;fog saturation in the
room must not reduce the
vislbllity to below 10m .
The product must be operated at a temperature range of between -5
℃
and 45
℃
only. Protect the product against direct exposure to sunlight or other heat, such as
from rediators ! If the product is taken from a cold environment into a warm
environment it must only be taken into operation once it has reached ambient
temperature, since the condensation created by the difference in temperature may
destroy the device!
Protect the product against dust! Dust may reduce the protective insulation, which
may cause fatal electric shocks!
The product must be operated at altitudes ranging between 20m below and 3000m
above sea level only!
The product must not be operated during thunder storms; risk of destruction from
surge voltages!
The product must be operated at a minimum distance of 1.5m to lit objects only!
5. Installation
