![background image](http://html1.mh-extra.com/html/tivoli-audio/two/two_owners-manual_1120500007.webp)
7 – ENGLISH
Guide To Features (Front Panel)
1.
POWER: Push to power the Music System Two+ On or Off (Standby).
2.
VOLUME/MENU/TREBLE: Rotate clockwise to increase the volume or counter-clockwise to
decrease the volume. The volume level is represented in numbers from 0 (no output) to 30
(maximum output). If the volume ever sounds distorted, reduce the level immediately. In DAB
and FM modes, push and hold the knob to access the menu. See the sections marked “DAB
Menu” and “FM Menu”. Push briefly and rotate counter-clockwise to reduce the treble or
clockwise to increase the treble. Press the volume knob in to set or the setting will store auto-
matically and the display will return to its previous state. This knob is also used to adjust and
enter selections (by pushing the knob in) when setting the Clock and Alarms. Adjusting the
volume during Snooze will cancel the Snooze mode.
3.
ALARM 1/ALARM 2: Briefly press and hold Alarm 1 or 2. A beep will confirm you are in the alarm
set-up mode and the corresponding green LED will illuminate. Rotate and press the Volume knob
in to adjust and set the hour (Figure 1) and minutes (Figure 2) and press in to set and move to the
next setting. Note, adjusting the hour does not affect the minutes and vise-versa. Set the alarm
source (Figure 3 and 4) and alarm volume (Figure 5) in the same manner. If you want the alarm to
wake to a particular station, you must press and hold the alarm button while in DAB or FM mode
to be able to set the alarm to wake to a specific station. Setting the alarm to wake to DAB or FM
when the unit is in AUX/BT mode or in standby will not allow setting a specific station. Setting the
alarm source to “AUX” will cause the alarm to wake to a tone. Bluetooth
cannot be selected as an
alarm source. When the alarm LED is off, press the Alarm button once to set the alarm. The display
will show the time the alarm is set to wake. When the alarm LED is on, press the Alarm button
briefly to turn it off. If the alarm is set and power is lost, the alarm will still sound (the tone will sound
in place of radio) at the designated time provided fresh batteries are correctly installed in the rear
battery compartment. When the alarm activates (Alarm LED flashes) you may either turn the unit
off and keep the alarm set for the next day, press the Snooze button to temporarily mute the alarm
for 7 minutes, or briefly press the Alarm button to cancel activation, turning the unit off, and keeping
the alarm set to wake the next day. Adjusting the volume during Snooze will cancel Snooze mode.
ALARM 1
ALARM 2
SOURCE
–
TUNE
+
CLOCK
SLEEP
4
5
6
AUDIO
POWER
1
2
3
2
5
3
1
6
7
11
4
9
10
12
13
8