10 – ENGLISH
Pairing a Bluetooth Wireless Technology
enabled iPhone/iPod touch/iPad with
the BluCon:
1.
Select “Settings”.
2.
Select “General”.
3.
Select “Bluetooth”.
4.
Switch Bluetooth “On” to initiate searching.
5.
Select “Tivoli Bluetooth (Not Paired)” when it
appears on the display. If you are prompted to enter
a PIN, enter “0000”. “Tivoli Bluetooth” will change
from “Not Paired” to “Connected”.
The volume output level of music files varies. If you
prefer an even higher output level, check the settings in
your iPhone/iPod touch/iPad: Set the EQ Off, the
SoundCheck Off, and the Volume limit Off.
If you ever encounter a problem, press the small arrow
to the right of “Tivoli Bluetooth” on your iPhone/iPod
touch/iPad display and select “Forget this Device”,
then repeat the pairing process.
When streaming music, you can press the blue arrow to
the right of the next track button >>/ on the iPhone/
iPod touch/iPad display to alternate between the
iPhone/iPod/iPad and Bluetooth.
• The BluCon will remember pairing information for
up to 8 devices. Additional devices can be paired,
but the least-recently used device will be replaced
by the newly paired device.
• If the audio drops out or stops during playback,
move your device closer to the BluCon, or check
to be sure another wireless device is not interfer-
ing with the signal.
• If you are using the BluCon near a radio and ex-
perience reduced reception or noise, move the
BluCon further away from the radio.
Содержание BiuCon
Страница 1: ...BluCon Wireless Music Receiver OWNER S MANUAL TM ...
Страница 2: ......