Tivoli Audio ART MUSIC SYSTEM HOME, Руководство пользователя

Страница: 30 / 404

English - 29
Auxiliary Mode
Your Music System Home can be used as a standalone speaker. Simply use an 1/8” stereo cable to
attach any line or headphone level source into the AUX input on the back of your radio. You can
control the volume of the speaker using the volume control on the Music System Home or using the
Tivoli Audio Wireless App. Please note the Music System Home cannot send the signal going into the
AUX input to any other speakers. If you wish to do this, refer to the Bluetooth over WiFi section of the
Music System Home manual.
CD Mode
Play/Pause: To play or pause a CD, press the bezel.
Manual Skip Next: To manually skip to the next track, rotate the bezel to the right.
Manual Skip Previous: To manually skip to the previous track, rotate the bezel to the left.
Eject: To eject the a CD, press and hold the bezel.
CD over WiFi
CD over WiFi enables you to play CDs through all of your ART by Tivoli Audio speakers..
Open the Tivoli Audio Wireless App and make a zone with the Music System Home set as the “mas-
ter” speaker, adding any other speakers you want to play the CD stream.
On the Sources page, make sure the CD slider is enabled.
You will now see that the CD is playing in the zone, and should hear your music on all speakers in-
cluded in the zone.
FM/AM Mode
Bezel Control
Manual Tune Up: To manually tune up to a higher frequency station, rotate the bezel to the right.
Manual Tune Down: To manually tune down to a lower frequency station, rotate the bezel to the left.
Autoscan Up: To autoscan to a higher frequency, quickly double press the bezel.
Add a station to your preset stations: To add a station to your saved preset stations, press the bezel
once.
Enter preset station mode: To enter preset station mode, hold the bezel until “Preset Mode” appears
on the screen of your Music System Home.
Settings Knob
Please go to the settings section for detailed operation.
Bluetooth Mode