![Titus THRC High Flow Скачать руководство пользователя страница 4](http://html1.mh-extra.com/html/titus/thrc-high-flow/thrc-high-flow_installation-and-operation-manual_1120195004.webp)
4
IOM - THRC
Redefine your comfort zone. ™ | www.titus-hvac.com
IOM
THRC HF & LF
Other
•
Clinics
•
Physician Offices
•
Correctional Facilities
•
Nursing Homes
•
Homeless Shelters
•
Addiction Recovery Center
Options
•
THRC
with UV
•
THRC
with ULPA Filter Upgrade
•
220 V, 50/60 Hz Unit Available
•
8 in. (203 mm) 100% Exhaust Collar Kit
■
Installation
Unpacking Instructions
1.
The
THRC
is shipped in an open-framed crate.
The module
should be inspected for exterior shipping damage
immediately
upon arrival. If any damage is observed, a claims
report
should be completed and promptly filed with the responsible
carrier.
2.
Uncrate and remove all packing material. Examine the unit for
internal damage. lf damage is discovered inside the crating, file
a claim with the responsible carrier immediately. The shipping
components list and actual material received should be compared and any shortages reported to
Titus
immediately.
Assembly
1.
The
THRC
is shipped completely assembled from the factory and requires no assembly. Every unit is
tested prior to
shipment to verify airflow and that the unit is leak-free.
2.
Place the unit in its final operating position.
3.
Lock the wheel locks on the casters to keep the unit from accidental repositioning.
Initial Start-Up
NOTE: THE CDC REQUIRES THAT QUANTITATIVE LEAKAGE AND FILTER PERFORMANCE TESTS BE PERFORMED
AT THE INITIAL INSTALLATION AND EVERY TIME THE FILTER IS CHANGED OR MOVED. TESTS SHOULD BE
REPEATED EVERY SIX MONTHS OR THE APPROPRIATE TIMEFRAME THAT IS REQUIRED FOR THE APPLICATION.
THE FACTORY TESTS SHOULD NOT BE SUBSTITUTED FOR THE INITIAL TEST.
CAUTION AND WARNINGS
READ AND SAVE THESE INSTRUCTIONS
WARNING: To reduce the risk of fire, electrical
shock, or injury to persons, observe the following.
1. Installation work and electrical wiring
must be done by a qualified person(s)
in accordance with all applicable codes
and standards, including fire-rated
construction.
2.
Service to this equipment should be
performed by an authorized technician
trained and experienced in performance
evaluation and maintenance of clean air
equipment.
3.
Before servicing or cleaning unit, unplug
the unit power cord from outlet to
prevent power from being switched on
accidentally.
4.
This unit may have UV lamps. Eye
damage may result from direct exposure
to the light. Take UV radiation protective
measures for personnel during service.
5. Use this unit only in the manner intended
by the manufacturer.