18
Fan Commission
Fan Commission Mode is entered by pressing the Fan Button for 5
seconds whilst in Run Mode.
A flashing item on the screen indicates it is being edited.
1.
Select the required fan speed using the number buttons at the
left of the screen. The current fan speeds is highlighted, the HRV
will run at the selected speed.
Extract
Supply
2.
Use the Supply to dwelling or Extract from dwelling buttons at
the top of the screen to select which fan is to be adjusted.
3.
Use the arrow keys to adjust the fan speed. The fan will respond
in real-time to the adjustment being made.
4.
Repeat the above for all fan speeds requiring adjustment.
5.
When all of the fan speeds are correct tap the Save button to
store all the fan speed settings to memory and exit back to Run
Mode.
Additionally Speed 1 can be set to Zero/Off. This is achieved by setting Speed 1
to 14.0 (72 m³/hr with TP737) & then pressing and holding button 1 until the value
changes to 0. The Zero/Off speed can be applied to both extract and supply fans
TP737 is for use exclusively with the
HRV3 Q AR Plus Eco (TP412BAR) and
displays the fan speeds as m³/hr.
All other controllers display fan
speed as a percentage.
