2
Warnings, Safety information and
Guidance
Important Information
Read instructions fully before the installing this appliance.
1. This manual covers the operation of the HRV control sys-
tem only, it must therefore be read in conjunction with
the relevant heat recovery unit Product Manual.
2. Installation of the appliance and accessories must be car-
ried out by a qualified and suitable competent person and
be carried out in clean, dry conditions where dust and
humidity are at minimal levels.
3. All wiring must conform to current I.E.E. Wiring Regula-
tions and all applicable standards and Building Regula-
tions.
4. aura-t
must be connected using the communication ca-
ble provided.
5. Control & communication cables should not be placed
within 50mm or on the same metal cable tray as any 230V
lighting or power cables.
6. Ensure all cable glands are fully tightened.
7. The unit must be stored in a clean and dry environment.
Do not install the appliance in areas where the following
may be present or occur;
• Excessive oil or a grease laden atmosphere,
• Corrosive or flammable gases, liquids or vapours,
• Ambient temperatures above 40°C or below -5°C,
• Humidity levels above 90% or is a wet environment.
