52
amount of files being saved. In Screen Off mode the detector will record for approximately
12 hours.
The live audio doesn
’
t seem to be working.
Ensure you have the volume at an appropriate level. Also ensure that you have selected an
appropriate audio mode (Heterodyne, Frequency Division etc.). If you have selected
heterodyne mode, you need to ensure that your heterodyne tuning line is at the correct
frequency for the bats you are listening for. If you would like to hear all frequencies, try
pitch shifting or frequency division. Using headphones instead of the internal speaker can
improve the listening experience.
My detector has
‘
frozen
’
, what should I do?
If your detector has become unresponsive, you can manually shut it down by pressing and
holding the power button for more than 8 seconds. You will hear a click and the screen
will turn off. You can now restart the detector.
Freezing is most commonly caused by an unsuitable or old SD card. Ensure your memory
card is meeting the
minimum SD card requirements
.
My recorded memos don
’
t seem to playback.
Ensure the volume is up on the detector, when low you may not be able to hear the
recording. In addition, when recording memos, be sure to speak into the voice memo
microphone that is located at the bottom of the screen.
I tried to select a button on the Main Menu, but it takes me back to Home Screen.
