TiTLEY Scientific Anabat Walkabout Скачать руководство пользователя

Страница: 51 / 56

•

When you want to pin-point and/or follow an individual bat.

Try using the Anabat Walkabout with and without the directional cone in different noise

levels, and see what you prefer.

If your application requires a highly directional microphone, for example areas of very high

insect noise, or driving transects, you can purchase an external microphone adapter which

suits the SD2 Stainless Steel microphone. This allows the microphone to be fitted directly

to the front of the detector for hand-held use, or on an extension cable. Please refer to the

product page on our website for more detailed information.

USING THE EXTERNAL MICROPHONE AND CAR MOUNT

If you would like to use the Anabat Walkabout to conduct driving transects, you can

purchase an external microphone adapter which suits the SD2 Stainless Steel microphone,

extension cable, and a car mount (available from Titley Scientific). This allows you to mount

the microphone on the vehicle whilst viewing a live display in the vehicle. The best position

for mounting the microphone on the vehicle will depend on the aerodynamics of the car.

Often it is best to point the microphone at a 45 degree angle down towards the car

bonnet/roof. The ultrasonic signal reflects off the smooth surface and is captured by the

microphone. Contact your local distributor for more information.

TROUBLESHOOTING

My detector battery seems to be running out of power quickly.

When you receive your detector you need to charge the batteries fully, with the detector

turned on before first use, this will calibrate the battery gauge. You can repeat this process

again at any time to re-calibrate the battery gauge. If you have done this, try using some

of the power saving options outlined in Tips for Active Monitoring. If you believe your

detector has a faulty battery, please contact your local distributor. Typically the detector

will run for approximately 6 to 8 hours, depending on how the detector is used and the

Содержание Anabat Walkabout

























































Результаты поиска

Содержание Anabat Walkabout

Отзывы:

Похожие инструкции для Anabat Walkabout

Бренды по названию

Популярные бренды

TiTLEY Scientific Anabat Walkabout, Руководство пользователя

Результаты поиска

Содержание Anabat Walkabout

Отзывы:

Похожие инструкции для Anabat Walkabout

Бренды по названию

Популярные бренды