5
RL20-2 /
Manual
Titgemeyer / 10342EN1121 / 1
English
1. Operating instructions
Read the operating instructions carefully
prior to use. Improper use may cause
the tool to work incorrectly. All infor-
mation and instructions apply to the
specified tool and may only be used for
the purpose of operating this tool.
All persons that adjust, operate or service
the tool have to become familiarized with
the operating instructions and have to
follow them. In special cases training can
be offered and organized by the seller.
The professional and safety measures
must be followed in order to ensure that
the tool works properly.
2. General Description
The RL20-2 riveting tool works with the
high-speed hydro-pneumatic principle.
The tool is designed for precise setting
of blind rivets. It is equipped with a
vacuum system for holding the rivet
in the nosepiece in any position. After
riveting the mandrel will be collected in
the mandrel collector.
The high-speed pneumatic-hydraulic
tool is designed for setting one-sided
blind rivets from 2,4 to 5 mm. This tool
with high stroke is also suitable for mul-
ti-grip blind rivets and blind rivets with
soft materials.
The operating instructions must be read
by every person using this tool. Pay
attention to the safety regulations.
3. Scope of use
4. Occupational health and safety
The following instructions and directives
apply to the riveting tool described in
these operating instructions and to all
user groups.
In addition to the general instructions
in this Chapter that concerns the entire
document and all procedures of using
the riveting system, some parts of this
document may contain additional safety
instructions which then specifically rela
-
te to the described matter.
5. Safety measures
Basic safety measures to avoid damages
and injuries.
Improper use of the tool may lead to
an injury or damage of property.
Size of rivets
2.4
3
4
4.8/5
Material Aluminium X
x
X
X
Steel
X
X
X
X
Stainless
x
X
X
x
