11
RL20-2 /
Manual
Titgemeyer / 10342EN1121 / 1
English
13. Transport Instructions
The tool is delivered completely as-
sembled. It has to be handled like a
fragile equipment. This product contains
hydraulic oil.
14. Requirements for Operators
All planning, assemblies, installations,
activations, maintenance and repairs
may only be performed by trained staff
and inspected by technical experts. Trai-
ning may be provided by the manufac-
turer by agreement.
The persons responsible for health and
safety must ensure the following:
— All works related to safety are only
performed by qualified staff.
—
The staff must be qualified on the
basis of their specialization (training,
education, experience) or on the basis
of their knowledge of corresponding
standards, specifications, accident-
prevention regulations and system
properties. It is essential that such
persons are capable of identifying
and avoiding any potential risks in
timely manner.
15. Tool Modifications
No structural modifications that could
negatively affect the tooling safety may
be performed on the tool without the
manufacturer’s consent. Any unprofes-
sionally performed repairs and the use
of incorrect spare parts are deemed to
be interference in the design of the tool;
the manufacturer cannot guarantee the
correct function of the tool or provide
warranty to the product in such cases.
The warranty does not apply to the tool
with damaged seals.
Risk of injury in case of incorrect
manipulation!
Working with this tool may not be dan-
gerous for the operator, when the regu-
lations in this manual have been read,
understood and followed. The operator
must follow the operations described
in this document. The maintenance and
service work that is not described in
these operating instructions may only
be performed by trained experts who
are trained by TTA.
