TITANTIG 200 DC PULSE PRO, Руководство по эксплуатации, Страница: 15 / 48

TitanTIG 200 DC Pulse Pro Operators Manual
Issue. A 0516
H.F. RADIATION can cause interference.

High frequency (HF,) can interfere with radio, navigation, safety services, computers,
and communications equipment.

Have only qualified persons familiar with electronic equipment perform this
installation.

The user is responsible for having a qualified electrician promptly correct any
interference problem resulting from the installation.

If notified by the FCC about interference, stop using the equipment at once.

Have the installation regularly checked and maintained.

Keep high-frequency source doors and panels tightly shut. Keep spark gaps at correct setting, and use
grounding and shielding to minimize the possibility of interference.
ARC WELDING can cause interference.

Electromagnetic energy can interfere with sensitive electronic equipment such as
computers and computer-driven equipment such as robots.

Be sure all equipment in the welding area is electromagnetically compatible.

To reduce possible interference, keep weld cables as short as possible, close together,
and down low, such as on the floor.

Locate welding operation 100 meters from any sensitive electronic equipment.

Be sure this welding machine is installed and grounded according to this manual.

If interference still occurs, the user must take extra measures such as moving the welding machine,
using shielded cables, using line filters, or shielding the work area