Titaniumbaby 5930, Инструкция по эксплуатации, Страница: 24 / 28

EN
8.2 Opening the buckle
Hold the two buckle latches with one hand, and another hand holds the
main part of the buckle with thumb pressing the red button until the two
tongues pops out from the buckle. (fig.11)
8.3 Seating your child in the child car seat
Put your child in the seat and put the shoulder pads on the shoulders of
the child. (fig.12)
8.4 Locking the buckle
Guide the two buckle latches together and engage them into the harness
buckle (E). (fig.13)
Warning!
Make sure the two buckle latches are put together correctly and there is no
twist of the harness.
8.5 Tightening the harness straps
Pull the harness adjust strap(M) until the shoulder pads(D) touches the
chest of your child. (fig.14)
9. Installing your child car seat and securing your child for Group II(15kg-
25kg)
9.1 Removing the harness system
9.1.1 Release the shoulder straps (I) and unhook it from the metal yoke (Q).
(fig.15)
9.1.2 Pull the shoulder pads (D) and shoulder straps (I) out of the shoulders
straps hole on the backrest (B). (fig.16)
9.1.3 Get both buckle latches out from the shoulder straps (I). Now you can
remove the shoulder strap easily by pulling it from the seat base. (fig.17)
9.1.4 Removing harness buckle (E) and crotch pad (J)
9.1.4.1 Slide the metal plate which is used to fasten the harness buckle to
the seat shell down on its edge through the strap slot. (fig.19)
9.1.4.2 Now both the buckle and crotch pad can be taken off from the seat
shell. (fig.20)