Titanium Plastificatrice Vision G60, Руководство по эксплуатации

Страница: 20 / 60

20
Vision G60
The following symbols and signal words are used in this user manual, on the
laminator or on the packaging.
This signal symbol/word designates a hazard with
moderate degree of risk which may lead to death or
severe injury if not avoided.
This signal symbol/word warns against potential
damages to property.
This symbol provides you with useful additional information regarding
operation or handling.
Declaration of Conformity (see chapter “Declaration of Conformity”):
Products marked with this symbol meet all applicable Community
regulations for the European Economic Area.
Read the user manual.
3. General information
Reading and storing the user manual
This user manual accompanies this A3 laminator. It contains important
information on start-up and handling. For improved readability, the A3
lamina- tor will be referred to only as the “laminator” below.
Before using the laminator, read the user manual carefully. This particularly
applies for the safety notes. Failure to heed this user manual may result in
severe injury or damage to the laminator.
When abroad, you must also observe country-specific guidelines and laws.
Store the user manual for future use. Make sure to include this user manual
when passing the laminator on to third parties.
Explanation of symbols
The laminator complies with protection class II: The laminator is equipped
with dual protective insulation and therefore contains no touchable metallic
parts, which could conduct voltage in the event of a fault.
Only use the laminator in indoor areas.