Titanium Office Professional A3, Руководство по эксплуатации, Страница: 26 / 60

26
OfficeProfessional A3
6. Operation
When using the laminator, a slight odour may be produced.
Ensure there is sufficient ventilation in the room, e.g. by opening windows.
Hot lamination
1. Turn on the power switch (ON/OFF) „ON“ and choose the suitable pouch
thickness. light on, then can start. 1 . The ready indicator will turn from dark
blue to red
2. Once the ready indicator 2 is red, place the document between the two sides of the
laminating pouch. Make sure that the document is flush with and aligned as close as
possible to the sealed edge of the laminating pouch.
3. Insert the laminating pouch so that it is centred and with the closed-edge first into
the laminating pouch infeed slot 3 on the back of the laminator. The heating rollers
will automatically pull the laminating pouch in and move it to the laminating pouch
output slot 4 on the front of the laminator. Don’t use force to pull out the laminating
pouch.
4. Remove the laminating pouch and let it cool off briefly on a flat surface.
Risk of injury!
Handling the laminator improperly may result in injury.
− If an object (sleeves, tie etc.) is unintentionally taken into the laminating
pouch infeed slot, immediately disconnect the mains plug.
Improper handling of the laminator may lead to damage to the
laminator or documents.
− Do not in any case laminate documents with a treated
surface (e.g. fax or thermopaper, Polaroid pictures etc.) and papers
with surfaces that may be altered through heat (tickets, ultrasonic
scans etc.)
− Only use one laminating pouch per lamination, as laminating
pouches may stick tightly together.
− Do not leave any laminating pouches in or next to the laminator
after lamination.