Titanium 601S, Руководство по эксплуатации

Страница: 14 / 44

12
Operation guide and remarks
1. Set the slide switch to ‘AUTO’, at the time, the machine is on standby; put
the shredding paper, vertically into the entry, thereafter, it starts up automati-
cally and does shredding; it returns to standby automatically after finishing.
2.
When jamming caused by inserting too much paper, or want to withdraw
the paper immediately at the normal shredding, please set the slide switch to
“REV”, at the same time, the machine does the reverse rotation for about 1
second and returns the paper that has not been shredded; then put the switch
to “OFF”.
3. To ensure your machine has a long use life and exerts good shredding
function, please refer notice the maximum number of shred paper.
4. If the machine works continuously or spasmodically for a long time, it may
pause because the inside temperature increases continuously. After resting
for a period of time, it can work again.
5. Please do not put clips, adhesive paper, adhesive tapes, or clothes into the
paper entry in order to avoid damaging the blades or lowering the shredding
performance.
6. If you want to clean the wastebasket or the machine, or the machine is not
to use for a long time, please cut off the electric power and unplug the machi -
ne.