background image

AUS

AFTER SALES SUPPORT

email: [email protected]

1800 909 909

MODEL: T12VW / T12VWP   PRODUCT CODE: 51546   12/2015

Phone lines available Monday to Friday, 8am - 6pm. 

AUS

AFTER SALES SUPPORT

email: [email protected]

1800 909 909

MODEL: T12VW / T12VWP   PRODUCT CODE: 51546   12/2015

Phone lines available Monday to Friday, 8am - 6pm. 

9

General Information  

& Safety Instructions

Safety information for battery powered screwdrivers and drills 

a.  Hold power tool by insulated gripping surfaces, when performing an operation 

where the fastener may contact hidden wiring or its own cord. Fasteners contacting 
a “live” wire may make exposed metal parts of the power tool “live” and could give the 
operator an electric shock. 

Safety notes for battery/charger 

a.  Keep the charger away from rain or damp. Water entering into the charger will increase the 

risk of an electrical shock.

b.  Only use chargers recommended by the manufacturer to recharge the battery. When using 

a charger designated for a particular type of battery, there is a risk of fire if it is used with 
other batteries.

c.  Never use to recharge third-party batteries. The charger is only designed to charge the 

supplied batteries (Li-ion) using the voltages specified in the Technical Data. Otherwise 
there is a risk of fire or explosion.

d.  Keep the charger clean. Contamination will increase the risk of an electrical shock.

e.  Check the charger, cable and plug each time you use the unit. Do not use the charger if 

you find any damages. Never open the charger up yourself, have it repaired by a qualified 
specialist only and with original replacement parts. A damaged charger, cable or plug will 
increase the risk of an electrical shock.

f.  Never operate the charger on a surface that will burn easily (for example, paper, textiles 

etc) or in a flammable environment. There is a risk of fire occurring as a result of the heat 
generated during the charging process.

g.  Fluid can escape from the battery when used incorrectly. Avoid all contact with this. In the 

event of accidental contact, rinse with water. If liquid should get into the eyes, get medical 
assistance. Battery fluid may result in skin irritations and burns.

h.  Do not open the battery. There is a risk of short-circuiting.

i.  Protect the battery from heat, for example, from constant sun and fire. There is a risk of 

explosion.

j.  Never short circuit the battery. There is a risk of explosion.

k.  In the event of damages and incorrect use, vapours may come out of the battery. Ensure 

plenty of fresh air and, if you have any symptoms, consult a doctor. These vapours may 
irritate the respiratory system.

General Information  

& Safety Instructions

5

51546 IM ed5.indd   9

15/9/15   7:00:38 PM

Содержание 12V Lithium-ION





























Отзывы: