TROUBLESHOOTING
1. WHY DOES THE TOOL NOT TURN ON WHEN
YOU PRESS THE SWITCH?
The forward and reverse switch, which is on top of the
trigger, is positioned in the lock function.
Unlock the forward and reverse switch putting it into the
required rotation position. Push the trigger and the tool
will start to rotate.
2. REASONS FOR DIFFERENT CHARGING
TIMES.
Your charge time can be affected by many reasons, which
are not defects in your product. If the battery pack is only
partly discharged it may be re-charged in less than 30
min. If the battery pack and ambient temperature are very
cold then recharging may take 1 . If the battery pack is
very hot it will not re-charge because the internal
temperature safety cutout will prevent it.
If the battery pack is very hot you must remove your
battery pack from the charger and allow your battery pack
to cool first to ambient temperature and then recharging
can be started. If you charge a second battery pack
immediately after the first then the charger can be
overheated. Always allow at least 15 minutes rest
between battery pack charging.
3. REASONS FOR DIFFERENT BATTERY PACK
WORKING TIMES.
Charging time issues, as above, and having not used a
battery pack for a prolonged time will reduce the working
life of the battery pack.
This can be corrected after several charge and discharge
operations by charging & working with your tool. Heavy
working conditions such as large screws into hard wood
will use up the battery pack energy faster than lighter
working conditions. Do not re-charge your battery pack
below 0°C and above 50°C as this will affect
performance.
10.8V IMPACT DRIVER
