EN
26
In
more
detail...
TTI884COM
EN
Product functions
Function selection ring
Screw driving mode for driving screws
Drilling mode for drilling into wood, plastic and metal
Impact drilling mode for impact drilling into brick, tile and concrete
Forward / reverse rotation control
Change the rotational direction from forward to reverse by pressing the forward /
reverse rotation control (6).
WARNING!
Only change the rotational direction when the product is
switched off and has come to a complete stop! Always ensure that the
forward / reverse rotation control is adjusted to the correct position
depending on the intended operation!
Always push the forward / reverse rotation control as far as it will go!
Do not use the product with the control switch in any other position!
1. Move the forward / reverse rotation control (6) to the left (as seen from the
operators position) in order to use the product in a clockwise rotational mode
(Fig. 8).
2. Move the forward / reverse rotation control (6) to the right (as seen from
the operators position) in order to use the product in anticlockwise rotational
mode (Fig. 9).
3. Move the forward / reverse rotation control (6) to the centre position to lock
the on/off switch (7) and avoid accidental starting (Fig. 10).
Position
Rotational
direction
Application
6
Fig. 8
Drilling into material
Screw driving
MNL_18V 2X 2AH Li-ION BRUSHED COMBI DRILL_V2_211220.indd 26
12/20/21 11:39 AM
