EN
32
In
more
detail...
TTI866JSW
EN
Troubleshooting
Troubleshooting
Problem
Possible cause
Solution
1.
Product does
not start
1.1.
Forward / reverse
rotation control at centre
lock position
1.1.
Push forward / reverse
rotation control to left or
right
1.2.
Battery pack not
properly attached
1.2.
Attach properly
1.3.
Battery pack discharged 1.3.
Remove and charge
battery pack
1.4.
Battery pack damaged 1.4.
Replace with a new one
of the same type
1.5.
Other electrical defect
to the product
1.5.
Check by a specialist
electrician
2.
Product does
not reach full
power
2.1.
Battery pack capacity
too low
2.1.
Charge battery pack
2.2.
Air vents are blocked
2.2.
Clean the air vents
2.3.
Ambient temperature is
cold
2.3.
Run the product for a
while to warm up.
3.
Unsatisfactory
result
3.1.
Saw blade is worn
3.1.
Replace with a new one
3.2.
Saw blade not suitable
for intended operation
3.2.
Use suitable drill bit
4.
Product
suddenly
stops
4.1.
Product overloaded
4.1.
Remove the product
from the workpiece and
switch it on again
4.2.
Battery pack discharged 4.2.
Remove and charge
battery pack
4.3.
Battery too hot
4.3.
Remove battery pack
and let it cool down
5.
Excessive
vibration or
noise
5.1.
Saw blade is dull/
damaged
5.1.
Replace with a new one
5.2.
Saw blade is too long or
short
5.2.
Change the saw blade
to one of suitable length
MNL_18V CORDLESS JIGSAW KIT_MJS18-Li_V1_211222.indd 32
2021/12/22 1:37 PM
