Titan TTI526COM, Инструкция по безопасности и эксплуатации

Страница: 9 / 22

18V LI-ION COMBI DRILL TTI526COM
Vibration total values (triax vector sum) determined according to EN 60745:
Drilling& Screwdriving
Vibration for drilling into metal a
h, D
= 2.28m/s
2
Vibration for impact drilling into concrete a
h, ID
= 11.47m/s
2
Vibration for screwdriving a
h
= 1.492m/s
2
Uncertainty K = 1.5m/s
2
The declared vibration emission value should be used as a minimum level and should be
used with the current guidance on vibration.
Calculating the actual period of the actual period off use can be difficult and the HSE
website has further information.
The declared vibration emission been measured in accordance with a standardised test
stated above and may be used to compare one tool with another.
The declared vibration emission value may also be used in a preliminary assessment of exposure.
WARNING:
The vibration emission value during actual use of the power tool can
differ from the declared value depending on the ways in which the tool is used
dependant on the following examples and other variations on how the tool is used:
How the tool is used and the materials being drilled.
The tool being in good condition and well maintained
The use the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed
WARNING: Identify safety measures to protect the operator that are based on an
estimation of exposure in the actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is switched off and when it is running
idle in addition to the trigger time).Note The use of other tools will reduce the users’ total
working period on this tool.
Helping to minimise your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
Avoid using tools in temperatures of 10°C or less
Plan your work schedule to spread any high vibration tool use across a number of days.
Health Surveillance All employees should be part of an employer’s health surveillance
scheme to help identity any vibration related diseases at an early stage, prevent disease
progression and help employees stay in work.
Double insulation:
The charger is double insulated. This means that all the external metal parts are electrically
insulated from the mains power supply. This is done by placing insulation barriers between
the electrical and mechanical components making it unnecessary for the tool to be earthed.
Important note:
Be sure the supply is the same as the voltage given on the rating plate for the charger. The
charger is fitted with a two-core cable and plug.
Remove the mains plug from socket and battery from the drill before carrying out any
adjustment or servicing.