background image

5)  SERVICE

a) 

 This will ensure that the safety of the power tool 

is maintained.

SAFETY WARNINGS FOR PLANERS

a) 

 

An  exposed 

rotating cutter may engage the surface leading to possible loss of control and 

serious injury.

b) 

Cutting  a  “live”  wire  may  make  exposed  metal 

parts of the power tool “live” and could give the operator an electric shock.

c) 

 

Holding the workpiece by your hand or against the body 

leaves it unstable and may lead to loss of control.  

d)  The power tool shall not be wet or applied in wet environment. 

e) 

nameplate of the machine.

f)  Check the product, its power cord and plug as well as accessories for damage 

before each use. Do not use the product if it is damaged or shows wear.

g)  Be aware of kickback.

h)  Turn the product off immediately, if the cutting blade gets jammed.

i)  Never touch the workpiece with your hand when you are working on it.

j)  Do not work overhead

.

k)  Ensure that the workpiece is free of foreign objects such as screws or nails.

l)  Keep  the  handles  dry  to  ensure  safe  control.  Grip  the  product  securely  with 

two hands so you have full control at all times. 

m)  Ensure  that  the  air  vents  are  always  unobstructed  and  clear.  Clean  them  if 

necessary with a soft brush. Blocked air vents may lead to overheating and 

damage the product.

n)  Switch the product off immediately if you are disturbed while working by other 

people  entering  the  working  area. Always  let  the  product  come  to  complete 

stop before putting it down.

o)  Do not overwork yourself. Take regular breaks to ensure you can concentrate 

on the work and have full control over the product.

p)  Always keep the power cord behind the power tool.

The following information applies to professional users only but is good practice for all 

users:

ADDITIONAL SAFETY WARNINGS FOR CONSTRUCTION DUST

The  updated  Control  of  Substances  Hazardous  to  Health  Regulations  1st  October 

2012 now also targets to reduce the risks associated with silica, wood and gypsum 

dusts.

Construction workers are one of the at-risk groups within this because of the dust that 

they breathe: silica dust is not just a nuisance; it is a real risk to your lungs! 

9

Содержание TTB930PLN

































Отзывы: