Therefore check the product using this section. In most cases the problem can be
solved quickly.
WARNING!
Only perform the steps described within these instructions!
All further inspection, maintenance and repair work must be performed
cannot solve the problem yourself!
Solution
Product does not
start
supply
Connect to power supply
Power cord or plug is defective
Check by a specialist
electrician
Product does not
reach full power
operation with this product
has too low voltage
Connect to another power
source
Air vents are blocked
Clean the air vents
Unsatisfactory
result
Blade is dull/damaged
Replace with new one
poor surface quality
Reduce the feed
centre of the planer base plate
Adjust the position to apply
working pressure
or noise
Blade is dull/damaged
Replace with a new one
Bolts/nuts are loose
Tighten bolts/nuts
Blade not mounted parallel
Mount the blade parallel
Motor runs, but
roller doesn’t work
or stops
Drive belt worn or broken
Replace with a new one by a
25
