Titan TTB541DBT, Руководство пользователя

Страница: 7 / 20

TTB541DBT
16. Remove adjusting keys and wrenches.
From the habit of checking to see that keys and adjusting wrenches are removed
form the tool before turning it on.
17. Avoid unintentional starting.
Ensure switch is in the “off ” when plugging in.
18. Use outdoor extension leads.
When tool is used outdoors, use only extension cords intended for outdoor use and
so marked.
19. Stay alert.
Watch what you are doing. Use common sense. And do not operate tool when you
are tired.
20. Check for damaged parts.
Before further use of the tool, it should be carefully checked to determine that it will
operate properly and perform its intended function. Check for alignment of moving parts,
binding of moving parts, breakage of parts, mounting and any other conditions that may
affect its operation. A guard or other part that is damaged should be properly repaired or
replaced by an authorised service centre unless otherwise indicated in this instruction
manual. Have defective switches replaced by an authorised service centre. Do not use
the tool if the switch dose not turn it on and off.
21. Warning.
The use of any accessory or attachment other than those recommended in this
instruction manual may present a risk of personal injury.
22. Have your tools repaired by qualified person.
This electrical tool complies with the relevant safety rules. Repairs should only be
carried out by qualified persons using original spare parts, otherwise this may result in
considerable danger to the user.
HEALTH ADVICE
WARNING! When drilling, sanding, sawing or grinding, dust particles will be prod-
uced. In some instances, depending on the materials you are working with, this dust can
be particularly harmful to you (e.g. lead from old gloss paint).You are advised to consider
the risks associated with the materials you are working with and to reduce the risk of
exposure. You should:
-
Work in a well-ventilated area.
-
Work with approved safety equipment, such as those dust masks that are specially
designed to filter microscopic particles.
!
07
ADDITIONAL SAFETY INSTRUCTIONS FOR YOUR BENCH DRILL PRESS
1. Only use lubricating oil on drill bits and not near to motor or electrical components.
Never spray as a cooling agent. A fatal electric shock could occur.
2. Always use sharp drill bits.
3. Never use sub-standard or blunt drill bits.
4. Never use excessive force on drill handle.
5. Always secure the workpiece to be drilled.
6. Always ensure the machine is securely mounted to a solid workbench.
7. Never remove the guard.
8. Always wear suitable gloves when handling swarf.
9. Wear suitable clothing. Adjust all loose clothing and remove ties, neck chains rings and
watches.
10.Tie long hair back or preferably wear a hair net.
11.Use correct speed for size of drill (see speed chart).