Titan TTB541DBT, Руководство пользователя

Страница: 12 / 20

(Fig 10) and Nuts.
them on the upper side of the Vice(14) with the Flat Washer
through the work table's U-holes under the table. Then secure
Fitting the Vice(14) unpon the Work table(10), using the Bolts
You could use the Vice(14) when you drilling the small parts.
Mounting the Vice to the Work Table
fitted into the spindle.
This machine is supplied with a Morse taper stub shaft
its upper position.
-ssure to engage the taper and then let the spindle raise to
Handles lower the Chuck onto the wood. Gently apply pre
Place a piece of wood onto the drill table. Using the Feed
and the stub shaft external taper with white spirit.
To fit the Chuck(9), clean the protective film from the it
Fitting the Chuck
protection.
Chuck Guard is adjustable to varying depths to give more
the two piece guard will extend vertically up or down.
to cover rotating parts. Simply unscrew the wing nuts and
for drill installation and removal. Aways return the guard
the guard to be moved upwards to expose the Chuck(9)
Guard is spring loaded and on a hinge which allows the
and secure in place with the small screw. The Chuck
shield into the collar
on the collar.
ss head screws just below the hinge
onto the machine.
c Chuck Guard(6) is partially assembly
without the Chuck Guard(6) fitted.
Fitting the Chuck Guard
TTB541DBT
Assembly
Fig 10
12
Fig
8a
Fig 8b
The telescopi
Remove three cro
Position the transparent plastic
Warning:never attempt to use the machine
Fig 9
6
9
14
Nut
(Fig 9)
(Fig 8a–8b)