ROTARY HAMMER 1010W TTB277SDS
CAUTION
This is a very powerful Drill.
When using this drill it is essential that the following rules for use are followed.
1.
When drilling it is common that the core / drill bit jams in the material being drilled. This will
result in the drill trying to rotate around the drill bit and potentially come out of your grip. This
SDS Drill has a safety clutch mechanism. This safety clutch mechanism will be activated and
stop the drive to the drill bit BUT only if you resist the initial forces caused by the jamming by
securely holding the drill with both hands. As this is a very powerful drill these forces are
significant.
2.
ALWAYS ensure that the front handle is firmly affixed and secure.
3.
The Front and rear handle must be firmly held to resist any movement of the drill when the core
drill or drill bit becomes jammed.
4.
ALWAYS use this drill when standing on a firm and secure platform or the ground.
(DO NOT USE ON LADDERS OR STEPS)
5.
NEVER Start the Drill with the core or drill jammed in position.
6.
DO NOT stretch to hold the drill. Do not drill above shoulder height or below Knee height, as the
drill cannot be securely held.
