ROTARY HAMMER 1010W TTB277SDS
UK PLUG REPLACEMENT
The fuse in the main plug of your power tool should always
be replaced with one of identical rating.
Check the voltage given on your power tool matches the
supply voltage.
The power tool is supplied with a fitted plug, however if you
should need to fit a new plug follows the instruction below.
IMPORTANT
The wire in the mains lead are coloured in accordance with
the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured
blue
must be connected
to the terminal that is marked with the letter
N.
The
wire that is coloured
brown
must be connected
to the terminal that is marked with the letter
L.
A 13AMP (BS1363 or BS1363/A) plug must be
used and a 13 AMP fuse must be fitted.
13 AMP
FUSE
BROWN
L (LIVE)
CABLE GRIP
OUTER
SLEEVE
BLUE
N (NEUTRAL)
