Titan TTB085DRL, Инструкция по безопасности и эксплуатации

Страница: 8 / 11

1050W PERCUSSION DRILL TTB085DRL
TROUBLESHOOTING
If your power tool does not start, check the plug
on the power supply first.
If your power tool use in low efficiency, check the
tool speed and type of accessory.
If a fault can not be rectified, return the tool to an
authorised dealer for repair.
ENVIRONMENTAL PROTECTION
Waste electrical products should not be
disposed of with household waste. Please
recycle where facilities exist. For further
information visit www.recycle-more.co.uk
PLUG REPLACEMENT
The fuse in the main plug on the charger should
always be replaced with one of identical rating.
Check the voltage given on the charger matches
the supply voltage.
The fast charger include with you drill is supplied
with a fitted plug, however if you should need to
fit a new plug follow the instruction below.
IMPORTANT
The wire in the mains lead are coloured in
accordance with the following code:
Blue ---Neutral
Brown ---Live
The wire that is coloured
blue
must be connected
to the terminal that is marked with the letter
N
.The
wire that is coloured
brown
must be connected
to the terminal that is marked with the letter L .
If a 13AMP (BS1363 or BS1363/A) plug is used, a
13 AMP fuse must be fitted, or if any other type of
plug is used a 13 AMP fuse must be fitted.
13 AMP
FUSE
BROWN
L (LIVE)
BLUE
N (NEUTRAL)
OUTER
SLEEVE CABLE GRIP