8
www.titan-‐appliances.com
Electrical Requirements
WARNING -‐ ELECTRICAL SHOCK HAZARD!
è
ALWAYS plug into a grounded 3-‐prong outlet.
è
NEVER remove the grounding prong from the plug
è
NEVER use an adapter to bypass the grounding prong
è
DO NOT use an extension cord
è
Failure to follow these instructions can result in fire, electrical shock, or
personal injury.
Please make sure you have the following:
1. Proper electrical connection before you move your appliance into its final location.
2. A standard electrical supply (115 V, 60Hz), properly grounded in accordance with the National
Electrical Code and local codes and ordinances.
3. A separate circuit, serving only your appliance is highly recommended. Use receptacles that cannot
be turned off by a switch or pull chain.
4. The fuse (or circuit breaker) rating should be 3 Amps.
5. It is very important to have the appliance properly grounded to minimize possible shock hazard. The
following grounding method must be strictly observed:
•
The appliance is equipped with a power supply cord having a 3-‐prong grounding plug and must
be properly grounded.
•
The cord must be plugged into a mating 3-‐pronged wall socket and grounded in accordance with
the National Electrical Code and local codes and ordinances.
•
If a mating wall socket is not available, please ensure to have a properly grounded 3-‐prong wall
receptacle installed by a qualified electrician.
Leveling the Unit
IMPORTANT:
Regardless of which type of installation you choose, the appliance must be properly leveled in order to
work properly.
The feet at the bottom of the unit can be raised or lowered individually by rotating the plastic sheaths
around each of the feet. Rotate the feet until the appliance becomes level. Use a carpenter’s leveling
tool to verify the leveling. You may need to make several adjustments to level the unit.
Place a carpenter’s level on top of the product to see if the appliance is level from front to back and side
to side.
To adjust the height of the feet:
1. Turn the leveling feet to the right to lower that side of the unit.
2. Turn the leveling feet to the left to raise that side of the unit.