For safe operation
-----------------------------------------------------------------------------------------------------------------------------------------
■
HANDLING FUEL
1. The engine of the product is designed to run
on a mixed fuel which contains highly flammable
gasoline. Never store cans of fuel or refill the
tank of the unit in any place where there is a
boiler, stove, wood fire, electrical sparks, welding
sparks, or any other source of heat or fire which
might ignite the fuel.
2. Never smoke while operating the unit or
refilling its fuel tank.
3. When refilling the tank, always turn off the
engine and allow it to cool down. Take a careful
look around to make sure that there are no
sparks or open flames anywhere nearby before
refueling.
4. Wipe spilled fuel completely using a dry rag if
any fuel spillage occurs during refueling.
5. After refueling, screw the fuel cap back tightly
onto the fuel tank and then carry the unit to a
spot 10feet (3m) or more away from where it
was refueled before turning on the engine.
■
TRANSPORTATION
1. When hand-carrying the product, cover over
the cutting part if necessary, lift up the product
and carry it paying attention to the blade.
2. Never transport the product over rough roads
over long distances by vehicle without removing
all fuel from the fuel tank. If doing so, fuel might
leak from the tank during transport.
