28
TN-1341 INSTRUCTION MANUAL
ADJUSTING PRESSER FOOT ALTERNATION
The Titan TN-1341 is equipped with the Titan Climbing Device. This is the dial on the top of the
machine that adjusts the alternation of the two presser feet. This is used primarily when climbing
on and off material of different heights.
Because the Titan TN-1341 is a compound walking foot, the machine has the capability to climb
over seams of different heights. To ensure stitch length, tensions and stitch integrity is kept at the
highest level, the Titan Climbing Device allows the operator to adjust the alternation of the inner
and outer walking foot when sewing.
•
To increase the alternation, turn the Climbing device dial (Fig 30,
Item 1) to a higher number(clockwise). The higher the number,
the larger the gap between the inner and outer foot grows (Fig 31,
Item A).
•
To decrease the alternation, turn the Climbing device dial (Fig 30,
Item 1) to a lower number(counterclockwise). The lower the
number, the smaller the gap between the inner and outer foot
shrinks (Fig 31, Item A).
Notes on presser foot alternation:
•
Normally keep the dial between 2~3. This is the most common setting for average materials.
•
The climbing device is not a setting for overall thickness, it is used to sew on different levels
of height in the material
•
While it is ok to leave this setting at maximum height, your machine will be noisier and often
fatigue the operator faster because of the excess noise when sewing at maximum.
Figure 30
Figure 31
Содержание TN-1341
Страница 1: ...TITAN TN 1341 INSTRUCTION MANUAL...
