4
STEP 1
No tools are required to assemble this product.
(However, if the ramp is to be secured to the landing surface, then appropriate tools will
be required). Remove items from packaging, Check for damage.
STEP 2
Press the button and pull out the telescopic part until clicks into place, to extend the
ramp, hold it horizontally or lay it on the floor. Note: If the latch is released (or is not
engaged) when the ramp is not horizontal, the inner section may slide out under its
own weight. At full extension, the latch will engage to prevent the inner ramp sliding out
totally
STEP 3
Place the ramp on the landing surface. Ensuring that the top lip is resting securely on
the landing surface.
ACKNOWLEDGEMENT OF RISK AND RELEASE OF LIABILITY
