and code input can be started again.
8. Then test the control code setting by trying to
control (in this example) your television set. If
it does not work at all or not correctly try a dif-
ferent code from the list or code search (see
below).
9. To make the setting for a DVB (SAT, CBL), re-
ceiver or a cable box, press the SAT/DVB
(SAT, CBL) button instead of TV and enter a
DVB (SAT, CBL) code accordingly.
- You terminate the mode by pressing any
device button or by code input interruption of
more than 10 seconds.
Code search
If the brand of your appliance is not in the list or
none of the codes given fits, we recommend a
code search.
Manual code search
1. Switch on the appliance to be controlled. Pro-
gram is running.
2.
To prepare code search, press the
OK
button
and the appliance button, e.g.
TV
, simultan-
eously until the lamp (LED) lights constantly.
3. Then point the remote control at the appli-
ance to be controlled.
4. Briefly press the ON/OFF
button once.
The lamp (LED) blinks.
5. Press the ON/OFF
button about any 1
second so often until the appliance, e.g. your
TV reacts by power off.
- You can invert search direction by pressing
the
OK
button and then
again.
- If your appliance has switched itself off, you
must switch it back on again, e.g. on the appli-
ance or with the original remote control, to con-
tinue searching.
- When your appliance reacts you can also try
out other buttons without interrupting the
search. If some buttons do not work properly,
simply continue searching by pressing ON/OFF
again.
6. When your appli-
ance reacts cor-
rectly, press the ap-
pliance button, e.g.
TV
for end of
searching and sav-
ing of found code.
The lamp (LED)
goes out.
- The last code
entered
remains
stored. The search
stops after approx. 30
seconds of inactivity.
Automatic code
search
1. Switch on the appli-
ance to be con-
trolled. Program is
running.
2. To start the code
search, press the
OK
button and the
Vivanco GmbH, D-22926 Ahrensburg, E-Mail:
, Helpline: +49 (0) 4102 231135
3