(GB)
Instructions
Inserting the
batteries
Open the battery com-
partment on the under-
side of the remote..
Then insert 2 AAA bat-
teries. Make sure that
the polarity is correct:
the "+" and "-" mark-
ings on the batteries
and in the compart-
ment must match.
-
To check functional-
ity, press the
but-
ton. If everything is
correct the red lamp
flickers when the button is pressed.
Adapting to appliances
In order to control your appliances you must ad-
apt or set the remote control to them. There are
two ways of doing so:
Direct control code entry using the enclosed
list
Example: setting to control a Panasonic televi-
sion set:
1. The enclosed list
gives, for example,
the Panasonic Code
436
.
- Please make sure you
have selected the cor-
rect list for television
sets (TV).
2. To prepare code
entry, keep the
OK
button and the
TV
button pressed simul-
taneously(!) until the
lamp (LED) lights
constantly.
3. Then enter the code
numbers as follows:
4. 1st number of code
(hundreds): Press the
button- 4
times for the 4 of
4
36.
Press as often as the
number indicates.
(1=once, 2 = twice,
etc.)
5. 2nd number of code (tens): Press the
VOLUME-
button 3 times for the 3 of 4
3
6.
6. 3rd number of code (ones): Press the
CH/SKIPΔ
button 6 times for the
6
of 43
6
.
7. Finally, press the
OK
button again briefly. The
lamp (
LED)
goes out.
- To enter a 0, do not press any button.
- If lamp flashes twice code was not accepted
Vivanco GmbH, D-22926 Ahrensburg, E-Mail:
, Helpline: +49 (0) 4102 231135
2
