Titan TI-Jupiter, Руководство пользователя

Страница: 7 / 14

Installation
Step 1. How to move the chair
CD
C ut the straps and unpack the box to access the base of the chair. R emo v e all pads
and cushions from the base and lift the chair from the points indicated in image below.
W ith 2 or more people, lift carefully and mo v e the chair to the desired location.
@ B e sure to keep all the cushions, remote and power cord together so that nothing is lost.
(as the picture shows)
Head pad Back seat cushion
Remote control Electric power cable
@Take out the left and right armrest from
the armrest carton box. Remove the armrest
slowly and carefully.
W e recommend that you
lay the armrest face up on a blanket or
carpeted floor to avoid scratches and tears.
W hen holding the armrest, handle by
grabbing on the indicated areas (image on
the right).
W hen moving the chair, one hand must grab
the metal frame along the seat base. T he other
hand will grab from behind the backrest. Refer
to the image below.
Left armrest
Massage chair
main body
Right armrest
@)Take out the legrest from the legrest box. remove from the box by grabbing the indicated locations.
Legrest device
Installation
Step 2. Massage chair position return
1.O nce the chair base and backrest are removed from the box, insert the power cord into the
chair and then into the outlet 2 . Turn on the power switch on the back of the chair and the
backrest will raise up as the seat base levels flat. 3 . O nce the chair is in the upright position
turn off the chair and proceed to next step of the install. (Refer to step 7, after the assembly)
Step 3. How to assemble the legrest
Massage chair position
return state
Install the legrest to the main chair body. 1 . Unscrew the bolt from the hanger of legrest .
2 . Please insert three air tubes of the legs into the air taps of the main body. Connect the
air tubes according to the color code. 3 . Above the air connections, insert the power
connector into the socket firmly. 4 .Lift up the legrest and align the axis into the hanger of
main body, then put down the axis cover. 5 . Screw on the bolt tightly.
Socket Air tap
Hanger
®@
Gray Brown Black
Legrst air tube connect
with air tap , power
line plug connect the
power socket.
axis cover
and screw
on the bolt
tightly.
•